- #SMAART 7 SPL WILL NOT CALIBRATE INSTALL#
- #SMAART 7 SPL WILL NOT CALIBRATE GENERATOR#
- #SMAART 7 SPL WILL NOT CALIBRATE PORTABLE#
- #SMAART 7 SPL WILL NOT CALIBRATE PRO#
#SMAART 7 SPL WILL NOT CALIBRATE PRO#
Under SPL tests you’ll find the analog SPL meter, an SPL Pro meter, an SPL graph, and something called Traffic Light. The start-up menu for AudioTools has six test categories-SPL, Acoustics, Line Input, Speakers, Utilities, and Settings.
#SMAART 7 SPL WILL NOT CALIBRATE PORTABLE#
Finally the recorder functions let you use your iPod, iPad, or iPhone as a portable recorder with selectable sample rates from 8kHz to 48kHz.
#SMAART 7 SPL WILL NOT CALIBRATE GENERATOR#
With AudioTools’ real-time analyzer and signal generator you can examine the frequency response of your speakers in any room or test environment. Anyone who’s used an RS unit will be quite familiar with its layout and functions, as they are identical to the original device. The AudioTools SPL meter looks very much like a classic RadioShack analog SPL meter. These active modules include an SPL meter, real-time analyzer (RTA), signal generator, and recorder. It comes with four of its twenty-four modules enabled. In this age of iPads and iPods it had to happen-someone has developed a complete suite of audio tests for the iPad, iPod, and iPhone called “AudioTools.” The basic AudioTools app package costs $19.99. The whole process took him less than half an hour. Out of a slim briefcase he produced everything he needed to run a complete battery of tests on my room.
I was amazed when Kevin Voecks came over to my home to set up a Revel speaker system and I saw such a rig for the first time. Then along came the computer age, and all those boxes were compressed into one medium-sized case with a portable computer, external interfaces, calibration microphones, and all the necessary cables. Scopes, tone generators, and calibration devices usually took up at least several square feet of surface on every tech’s desk. Windows 7 operating system (or newer) recommended.Back in the old days, measurements required an array of bulky black boxes. Please be sure that the reduced feature-set software included with 10EaZy RT will meet your needs prior to ordering.ġ0EaZy stand alone software is Windows ONLY. PLEASE NOTE: 10EaZy RT Systems cannot be upgraded to fully-featured 10EaZy software systems without returning the hardware for recalibration (shipping and labor costs will apply).
#SMAART 7 SPL WILL NOT CALIBRATE INSTALL#
Download and install the software, connect the hardware and thanks to the pre-calibrated hardware you are up and running with accurate measurements in a matter of minutes. Software can be downloaded at Īll you need to provide is a PC running Windows 7 (or newer). The RT System comes with limited feature 10EaZy software, a dedicated USB interface, a proprietary calibrated 1/2″ Class 2 measurement microphone with a windscreen & custom clamp and a BNC mic cable. If you do not need a running order, an event log or a minute by minute resolution logfile for post processing of measurement results, and can do with a single jpeg file listing a compilation of key measurement results, then 10EaZy RT is a cost effective solution for your SPL monitoring needs. It features the same tamper-free high quality hardware as the fully featured Class 2 system, but with a less expensive, reduced feature-set software. Integrates into Smaart! Best of both worlds available with one hardware.ġ0EaZy RT is a budget friendly Class 2 compliant version of the 10EaZy SPL Monitoring System.
0 kommentar(er)
